Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
-10- - Shift solenoid valve C3 (modulation pressure)
-11- - Shift solenoid valve B1 (modulation pressure)
-12- - Shift solenoid valve C2 (modulation pressure)
-13- - Shift solenoid valve (S2)
Preliminary work for wire harness
Preliminary work for wiring harness
1. Remove ATF filter.
Removing wire harness in transmission
Overview of wire harness
Information
-
The adaptation values of the Tiptronic control unit must be reset using the Porsche System Tester when replacing/renewing the wire harness.
1. Remove fastening screw from both connectors -Arrow-.
Connector installation