Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
2. Press rubber mounting flush into housing.
Information
Noises in drive line
-
Installation position of rubber mounting bulge is incorrect Rubber mounting bulge must be installed vertically into housing
-
Installation position of mount in housing is incorrect Pay attention to installation dimension of mount to housing
3. Install output flange.
Installing rubber mounting for rear final drive, drive side
Rubber mounting, drive side -1-
Information
Noises in drive line
-
Installation position of rubber mounting bulge is incorrect Rubber mounting bulge must be installed vertically into housing