Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
15. Press inner race off the wheel hub. To do this, position the T10205/2 bell (from attachments T10205) without the grip piece. Insert the tubular
piston cylinder vas 6178. Position the T10205/3 pressure piece (from attachments T10205) and the 8-2 nut for the threaded rod (from attachments
T10205).
16. Remove the -Snap ring-.
17. Remove the wheel bearing (tools).
18. Press out the wheel bearing. To do this, position the T10205/5 and T10205/4 (from attachments T10205) in correct position on the wheel bearing
housing. Insert the tubular piston cylinder vas 6178. Position the T10205/6 (from attachments T10205) and the 8-2 nut for the threaded rod (from
attachments T10205).