Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Ensure that the separating device does not press on the seat of the bearing inner race on the wheel hub.
9. If the wheel hub is used again, remove the inner race of the wheel bearing from the wheel hub. To do this, position the separating device 12 - 115
mm [diameter] NR.111 behind the inner race.
10. Press inner race off the wheel hub. To do this, position the T10205/2 bell (from attachments T10205) without the grip piece. Insert the tubular
piston cylinder VAS 6178. Position the T10205/3 pressure piece (from attachments T10205) and the T10205/8-2 threaded nut (from attachments
T10205).
11. Remove the circlip -arrow-.