Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Flex Plate: Service and Repair
Removing and installing drive plate for torque converter on DFI engines
Preliminary work
1. Remove the transmission or, with the engine removed, remove the transmission.
Removing drive plate for torque converter on DFI engines
Removing drive plate for torque converter on V8 DFI engines
1. Mark installation position of the drive plate relative to the crankshaft using a felt-tip pen.
Information
The threaded bore in the oil guide housing is a blind hole.
The toothed segment must be secured to the oil guide housing using a screw (M12 x 50). -2- This screw ensures that the toothed segment is
secured well and prevents damage to the blind hole thread because the thread is the correct length.
Drive plate toothed segment
The engagement point of the toothed segment must be facing the crankcase. -1-