Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-544004.png)
Drive plate toothed segment
The engagement point of the toothed segment must be facing the crankcase. -1-
Toothed segment on oil guide housing
Position toothed segment at the bottom two threaded bores of the oil guide housing.
2. Block the drive plate. To do this, attach toothed segment 95381 to a screw hole in the crankcase so that at least one tooth engages with the starter
teeth.
Toothed segment
3. Tighten the 10 new fastening screws crosswise. - Tightening torque: 60 Nm (44 ftlb.) then - Torque angle: 90 degrees
