Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Overview of servo motor
Caution
Servo motor not fitted correctly
^
Risk of damage to servo motor electronics
^
Servo motor is sluggish
-> Fit servo motor by hand.
-> Do not use impact tools or strikers, e.g. a hammer.
Information
^
If a new servo motor is installed, it is supplied in Low Range position, off-road driving program.
1. Connect the servo motor to the shaft on the transfer gear. Position the cut-out on the shaft -right inset- in line with the servo motor -left inset-.
Positioning servo motor
2. Screw in servo motor screws -arrows- on the transfer gear. -> Tightening torque: 27 Nm (20 ftlb.)
3. Screw in screws for servo motor support -arrows- on the transfer gear. -> Tightening torque: 10 Nm (7.5 ftlb.)