Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Removing control unit for rear differential lock
2. Release lock -1- on the connector -2- (-arrow A-) and pull off connector -2- (-arrow B-).
Pulling off connector
3. Release holder -1- at the two clips -arrows A-, lift up control unit for rear-differential lock -2- and slide it out -arrow B-.
Removing control unit for rear differential lock
Installing control unit for rear-differential lock
1. Slide control unit for rear-differential lock -2- fully into the holder -1- and press it in -arrow A- until the two clips -arrows B- engage securely.