Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Driving in the sealing ring
2. Install output flange and, if necessary, drive in with a plastic hammer.
Information:
-
Ensure that the round seal is inserted.
Rubber ring for rear output drive
-
Replace nut on output flange.
-
Fit nut using screw locking device.
3. Screw in output flange nut using special tool socket T10204. To do this, counter the flange with special tool arm bracket 3435. - Tightening
torque: 100 ftlb.
Output flange nut
4. Caulk nuts at the recesses in the output shaft.