Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Seals and Gaskets: Service and Repair
Removing and Installing Sealing Ring For Transfer Box Input Shaft
Removing and installing sealing ring for transfer box input shaft
Tools
Preliminary work sealing ring for input shaft transfer box
1. Remove transfer box.
Removing sealing ring for transfer box input shaft
ATTENTION: Damage to input shaft bearing.
-> Drive beveled attachment in by approximately 2 mm.
-> Screw sheet metal screw max. two turns into the sealing ring.
1. Using the beveled attachment from the slide hammer kit 168, make a small hole -figure- in the sealing ring.
Preparing for removal