Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Preliminary work for transfer box sealing ring
1. Remove front cardan shaft.
2. Support transfer box with transmission jack.
3. Support transmission with material 00000 and secure with retaining band.
4. Unscrew four exhaust system screws on the cross member -center arrow- and unscrew screw connection holder on body -right arrow-.
Exhaust system at cross member
5. Unscrew transmission cross member on body -A-.
Transmission cross member
6. Unscrew two screws on the cross member -B- on the transfer box holder and remove transmission cross member.
Removing sealing ring for front transfer box output