Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Headlamp Washer Spray Nozzle: Service and Repair
Removing and Installing Cover For Spray Nozzle
Removing and installing cover for spray nozzle
Removing cover for spray nozzle
1. Disengage cap on nozzle head.
1.1. Front apron installed: Hold cover of spray nozzle at the sides, pull out the nozzle head -1- ( -arrow A- ) and hold it firmly.
1.2. Disengage cap -2- at the latches on the nozzle head -1- ( -arrows B- ) and remove it.
Installing cover for spray nozzle
INFORMATION: If the cover of the spray nozzle has to be replaced, the new part must be painted the same colour as the front apron.
1. Engage cap on nozzle head.
1.1. Pull nozzle head -1- out of the front apron -arrow A- and hold it tightly.
1.2. Engage cap -2- at the latches on the nozzle head -1- ( -arrows B- ).
2. Slide nozzle head and cover into the locking teeth on the spray nozzle.
3. Release spray nozzle and check the gap to ensure that the spray nozzle cover is positioned evenly all the way round.