Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Wiper Switch: Service and Repair
WM 945019 Removing and Installing Steering-Column Switch
Technical Values
Tightening Torque
Fastening Screws for securing steering column switch, M6 .................................................................................................................................... 4.5 ft/lbs
Preliminary Work
Preliminary work for removing and installing column switch
1. Observe the airbag safety regulations.
2. Remove driver's airbag unit.See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair
3. Remove steering wheel.See: Steering and Suspension/Steering/Steering Wheel/Service and Repair
4. Remove steering column trim. See: Steering and Suspension/Steering/Steering Column/Service and Repair
Removing Steering-Column Switch
Caution!
Risk of Short Circuit!
Before removing steering column switch, remove ignition key
Warning!
Risk of Damage to Airbag Contact Unit!
When removing and installing steering column switch, the steering wheel must be pulled off in the straight-ahead position. This ensures that the
airbag contact unit is locked in the central position.
If the setting has inadvertently changed (locking element released, airbag contact unit out of adjustment), the airbag contact unit must be adjusted
as follows.