Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Windshield Washer Spray Nozzle: Service and Repair
Removing and Installing Spray Nozzle
Removing And Installing Spray Nozzle
Removing spray nozzle
1. Open the bonnet.
2. Switch off ignition and remove ignition key.
3. Disengage cover -arrow A- , disconnect the electrical plug connection -arrow B- and pull the hose connection -arrow C- apart.
4. Pull the spray nozzle downwards -arrow A- and remove from the bonnet -arrow B- along with the connections.
Installing spray nozzle
1. Insert spray nozzle along with the lines under the bonnet -arrow A- and engage -arrow B-.
2. Insert the lines through the opening, connect electrical plug connection -arrow B- and connect the water feed line -arrow A-. Position the cover
-arrow C- under the bonnet.