Cayenne Turbo S (9PA) V8-4.5L Turbo (2006)
Console: Procedures
Eliminating Noise Symptoms - Reworking Centre Console Cover
General information
Symptoms
Rattling noises from around the centre console cover.
Causes and remedial action
Rattling noises can be heard while driving due to a loose plug connection that is not acoustically decoupled (gear selecting system).
In the event of a complaint, a plastic foam strip must be wrapped around the plug connection (gear selecting system) to remedy the situation on vehicles
manufactured before the date of introduction July 2005.
Tools and materials
997.555.895.00 Plastic foam strip
Preliminary work
Remove centre console cover. Refer to Removing and installing centre console cover.
Reworking centre console cover
1. Cut a plastic foam strip approx. 300 mm long.
2. Cover plug connection for the gear selecting system -1- with the plastic foam strip -2-.
3. Wedge the plug connection for the gear selecting system -1- slightly close to the centre console.
Subsequent work
Install centre console cover. Refer to Removing and installing centre console cover.