Cayenne Turbo S (9PA) V8-4.5L Turbo (2006)
/v8-4.5l_turbo/Page-1847018.png)
8. Clip cover flap -2- into the cut-out for the C-pillar trim.
9. Position bottom belt fitting -4-, screw in fastening screw -5- and tighten to the specified tightening torque. Tightening torque: 50 Nm (37 ftlb.)+4.0
Nm (+3.0 ftlb.)
10. Fold seat cushion of rear seat back up.
Installing release for height adjustment of seat belt
1. Move actuator for seat belt height adjustment and adjustment fitting into assembly position.
1.1. Push actuator for seat belt height adjustment -1- into upper end position.
1.2. Move adjustment fitting at B-pillar -4- into upper end position.