Cayenne Turbo S (9PA) V8-4.5L Turbo (2006)
Catalytic Converter: Service and Repair
Removing and Installing (Main) Catalytic Converter
Removing And Installing (main) Catalytic Converter
Preliminary work
1. Remove the engine guard.
2. Lift the vehicle.
Removing (main) catalytic converter
Removing (main) catalytic converter, cylinder bank 1 - 4
ATTENTION:
Danger of burns from hot exhaust system
-
Do not remove the exhaust system until it has cooled down.
-
Wear protective gloves.
NOTE:
-
Cover the right wing and guide through a ratchet from above using several extensions in order to loosen the top nut between the primary and main
catalytic converters.
-
If the working height of the vehicle has to be changed due to further work, the transmission support must be re-fitted using the old bolts.
Cayenne Turbo (M48/50)