Cayenne Turbo S (9PA) V8-4.8L Turbo (2010)
2.1. Unscrew fastening nuts and fastening screw -A- on the right and left heat shield.
2.2. Remove left and right heat shield.
DANGER:
Danger of injury.
-
Wear suitable protective clothing.
-
Observe warnings on the isopropanol and body sealant containers.
-
Avoid contact with the skin and eyes.
INFORMATION: After cleaning with isopropanol, a ventilation period of approx. 30 minutes must always be observed.
3. Clean surrounding edge between the firewall plate and the front panel from the outside, in the area shown -arrows- , at the edge with cleaning
agent (isopropanol).
DANGER:
Danger of injury.
-
Wear suitable protective clothing.
-
Observe warnings on the isopropanol and body sealant containers.
-
Avoid contact with the skin and eyes.
INFORMATION: When sealing the firewall plate, ensure without fail that the water drains in the air-conditioning system are not blocked with
sealant.
4. Seal firewall plate from the outside, in the area shown -arrows- , at the edge between the firewall plate and front panel, all the way round with ->
Sikaflex-529 body sealant, 000.043.206.36 .
5. Install left and right heat shield (above the catalytic converters).