Cayenne Turbo S (9PA) V8-4.8L Turbo (2010)
12. Connect plug and clip in wire harness for parking brake contact switch.
12.1. Push on the plug -8- until the locking tabs engage audibly -arrow O-.
12.2. Clip in wire harness -6- on fastening clip -7- -arrow P-.
13. Install control unit carrier.
13.1. Insert control unit carrier -10- and support -11- on bracket -Arrow R- and pull downward -Arrow S-.
13.2. Screw in nut -9- and tighten to the specified torque. Tightening torque: 8 Nm (6.5 ftlb.) ± 1 Nm (±0.5 ftlb.)
14. Screw air-conditioning unit on bracket.
14.1. Screw in fastening screws -13- and tighten to the specified torque. Tightening torque: 10 Nm (7.5 ftlb.) ± 0.5 Nm (±0.5 ftlb.)