Cayenne Turbo S (9PA) V8-4.8L Turbo (2010)
1. 3. 6
When fitting the remaining three clamps, make sure that the lashing points on the top ( -> Figure 6 -1-) are aligned forward and
backward symmetrically with respect to the driver's or passenger's side.
CAUTION:
Risk of damage to the load or to the roof box if
-
profile rails (ski supports) are not secured.
-
Never transport profile rails (ski supports) in the roof box unsecured. Always fasten them as described in the instructions for use.
1.4 Fit the two ski supports (if necessary).
1. 4. 1
Position the M8 x 45 hexagon-head bolt ( -> Figure 7 -1-) into the sliding block (plastic, -> Figure 7 -2-) with the bolt head flush ( ->
Figure 7 -A-). Guide the (plastic) sliding block together with the M8 x 45 hexagon-head bolt into the groove on the underside of the
ski support ( -> Figure 7 -3-, -> Figure 7 -B-).
Fit the remaining sliding blocks in the same way.