porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Backup Lamp Switch|Service and Repair|Page 5758 > < Tire Pressure Sensor|Service and Repair|Page 5752
Page 1
background image

Backup Lamp Switch: Service and Repair

Removing And Installing Switch For Reversing Light

Technical values

Preliminary work

Remove rear underbody cover.

Removing switch for reversing light

Removing switch for reversing light (5-speed transmission)

1. Release connector on switch for reversing light -Arrow a- and pull it off.
2. Unscrew the two fastening screws -1- on the holder -2-.

3. Unscrew fastening screw -1- and remove holder -2-.

Backup Lamp Switch|Service and Repair|Page 5758 > < Tire Pressure Sensor|Service and Repair|Page 5752