Cayman (987) F6-2.7L (2007)
Accelerator Pedal: Service and Repair
Removing And Installing Accelerator Pedal
INFORMATION:
The accelerator pedal is an electronic accelerator pedal unit without a mechanical accelerator cable. The electric printed circuit board, among other
things, is integrated in the accelerator pedal unit. On vehicles with Tiptronic transmission, the accelerator pedal unit also features a spring-loaded aneroid
diaphragm -3- for kickdown simulation. The integrated pedal stop obviates the need for a basic kickdown setting.
Removing accelerator pedal
Removing
1. Loosen accelerator pedal.
Remove screw -4-.
2. Remove accelerator pedal.
Pull accelerator pedal forward slightly and remove it in an upward direction.
3. Pull off electric connector on accelerator pedal.
Press locking mechanism (see -Arrow-) down as far as the locking point and pull off electric connector -2-.
Installing accelerator pedal
Installing