Cayman (987) F6-2.9L (2009)
Tire Pressure Monitor Antenna: Service and Repair
Removing and Installing Transmitter (Trigger) For TPM
Removing and installing transmitter (trigger) for TPM
Preliminary work
1. Remove front wheel housing liner (part A).
2. Remove rear wheel housing liner (part A).
Removing transmitter (trigger) for TPM
Installation position of TPM antenna
Notice
Voltage peaks
Risk of damage to load or to the control unit
-
Remove the ignition key and switch off load before disconnecting or removing load.
1. Release -arrow A- and pull off -arrow B- connector.
Pulling off connector
2. Remove transmitter (trigger) for tire pressure monitoring system (TPM).
2.1.
Release the holder -1- using a screwdriver -arrow A-.
2.2.
Remove transmitter (trigger) for TPM from the holder -arrow B-.