Cayman (987) F6-2.9L (2009)
Work Procedure:
1
Preparatory work.
1.1 Disconnect the battery.-->Workshop Manual '2XOO1NO2 Work instructions after disconnecting the battery
1.2 Remove steering column switch.-->Workshop Manual '94501900 Removing and installing Steering column switch'
1.3 Only for vehicles on which the microphone wire harness must be installed (see Step 2.1)
1.3.1 Remove trim panel under dashboard (driver's side).-->Workshop Manual '701919 Removing and installing trim panel under dashboard'
1.3.2 Remove PCM3.0.-->Workshop Manual '9110191 Removing and installing display and operator control unit PCM 3.0'
2
Install microphone wire harness.
INFORMATION The table shows whether a microphone wire harness needs to be retrofitted.
2.1 Overview of installing microphone wire harness:
Vehicle equipment
Microphone wire harness Installation
BOSE sound package (l-no. 680)
Yes
ASK sound package (l-no. 490)
Yes
Telephone module (l-no. 666)
No
Mobile Phone hands-free facility (ln-no. 619)
No
BOSE sound package (l-no. 680)
and telephone module (l-no. 666)
No
BOSE sound package (l-no. 680)
and mobile Phone hands-free facility (ln-no. 619) No
ASK sound package (l-no. 490) and
telephone module (l-no. 666)
No
ASK sound package (l-no. 490) and
hands-free facility (ln-no. 619)
No
2.2 Prepare wire harness for microphone.