Cayman (987) F6-2.9L (2009)
1. Release electrical connector -a- and unplug it.
2. Unscrew the four fastening nuts -1- and remove the speaker.
Removing mid-tone speaker
CAUTION:
Voltage peaks can damage the audio system.
-
Before unplugging/removing audio components, remove ignition key and switch off audio system.
1. Release electrical connector and unplug it.
2. Unscrew the two fastening nuts -2- and remove the speaker.
Installing front loudspeakers (door)
Installing bass speaker
1. Position the speaker on the door unit carrier and screw it down with the four fastening screws -1-. - M6x30: 2.0 ftlb.±0.5 ftlb.
2. Push in electrical connector for the speaker until it is felt to engage.
Installing mid-tone speaker
1. Position the speaker on the door trim panel and screw it down with the two fastening screws -2-. - 5x12: 1.5 ftlb.+0.5 ftlb.
2. Push in electrical connector for the speaker until it is felt to engage.