Cayman (987) F6-2.9L (2009)
Rear Bumper Reinforcement: Service and Repair
Removing And Installing Rear Bumper
Technical values
Preliminary work
Remove rear apron. Refer to Removing and installing rear apron.
General warning notes
Safety instructions for the heat shield
CAUTION: Assembly of deformed heat shields.
-
Damage will be caused through heat build up if deformed heat shields are installed.
-
Check heat shields for deformation, fixing of the aluminium braided cord, tears and missing or damaged fixing tabs.
-
Damaged or distorted heat shields must be straightened or replaced.
Removing rear bumper
Removing support with heat shield at the sides
1. Unscrew fastening nuts -1, 2- and remove support with heat shield at the sides -3-.