Cayman (987) F6-2.9L (2009)
INFORMATION:
-
To fit the lock actuation correctly, the securing spring must be hooked into the lock actuation lever before the door lock is installed.
-
The secured position of the lock actuation is released automatically when the door handle is first pressed. A clear clicking sound can be heard
when the door handle is first pressed.
1. Light up inside of door with a lamp.
2. Guide the assembly tool T10118 -1- between the securing spring -2- and the lever -3-.
3. The securing spring -2- hooks on to the tool with a rotary movement.
4. Pull the securing spring -2- towards the outside of the door -arrow A- until the spring engages audibly in the locking lug of the lever -3-.
5. Unhook the tool -1- and remove it.
INFORMATION: Pull carefully on the lock actuation to check that it is secured in installation position. Repeat the steps listed above if necessary.
Installing door lock