Cayman (987) F6-2.9L (2009)
2. Push out the sliding piece -3- until it can be heard to engage.
3. Actuate the handle to ensure that the handle and door lock function without play.
Subsequent work
1. Install door unit carrier. Refer to Removing and installing door unit carrier.
Function test following assembly work
INFORMATION: A malfunction occurs only after the vehicle is locked for the first time. In other words: if a door lock was fitted incorrectly, the
affected door can be opened and closed without difficulty until the vehicle is locked for the first time. After that, the door cannot be opened either from
inside or outside. Given this, it is important to perform a function test before the door is closed.
1. Do not close vehicle door after fitting the door lock.
2. With the door open -2-, use a screwdriver to engage the bolt in the door lock -1- fully in the second notch.