Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-769004.png)
5. Use a plastic welder -1- TRIAC S plastic welder WE WE1120 to heat up the fastening pins -2- for the cover until visco-elasticity is achieved.
6. Use an 8-mm round stock -1- to press the fastening pins -2- in evenly on the door trim panel.
Subsequent work
1. Install switch for power windows. Refer to Removing and installing switch for power windows.
2. Fit door handle. Refer to Removing and installing door handle.
