Cayman (987) F6-2.9L (2009)
Front Subframe: Service and Repair
Removing and installing front-axle cross member
Preliminary work
1. Put steering wheel with wheels in straight ahead position and remove ignition key (steering wheel fixed.)
2. Raise the vehicle.
3. Remove front cover (underbody protection).
Removing and installing front-axle cross member
Removing
1. Pull connector -A- from sensor for HBA and loosen threaded joint -B- on control lever.
HBA sensor
2. Loosen support for coolant pipes (screwed on 4x) and press together the support for coolant pipes in the centre -arrows- and unclip.
Support for coolant pipes
3. Loosen anti-roll-bar mount -arrows- and allow anti-roll bar to hang.