porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Cover (Cold Air Bulkhead)|Page 4407 > < Removing and Installing Cover (Cold Air Bulkhead)|Page 4405
Page 4
background image

1. Lock plug connection for sun sensor.
2. Position centre dashboard cover (defroster trim) -1- and clip in -arrow-.

Subsequent work

Install A-pillar trim panel. Refer to Removing and installing A-pillar trim panel.

Removing and Installing Dashboard Cover

Removing And Installing Dashboard Cover

Removing dashboard cover

1. Unclip cover -1- using a plastic wedge on the retaining clips -2- and swivel it outwards -Arrow A-.

2. Remove the cover -1- to the rear -Arrow B-.

Installing the dashboard cover

Removing and Installing Cover (Cold Air Bulkhead)|Page 4407 > < Removing and Installing Cover (Cold Air Bulkhead)|Page 4405