porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Cover (Cold Air Bulkhead)|Page 4434 > < Removing and Installing Cover (Cold Air Bulkhead)|Page 4432
Page 31
background image

1. Insert trim panel under the dashboard -2- on the guides.

2. Swivel trim panel under the dashboard -2- upwards -Arrow A-.
3. Screw in -1- fastening screws. Tightening torque: 1.5 ftlb.

Removing and installing cover under dashboard on passenger's side

Removing the trim panel under the dashboard on the passenger's side

Removing and Installing Cover (Cold Air Bulkhead)|Page 4434 > < Removing and Installing Cover (Cold Air Bulkhead)|Page 4432