Cayman (987) F6-2.9L (2009)
INFORMATION: In order to reduce the unclipping forces and thereby the risk of damage during removal, the process must take place at the
accessible connection points using a suitable tool.
2. Unclip trim panel for spring strut mount -2- first upwards -Arrows A- and then pull out slightly in -direction of Arrow B-.
3. Press locking tabs together -Arrows a- and disconnect connector for loudspeaker -1-.
4. Check fastening nuts -1- and clamps -2, 3-, and replace if necessary.
Installing trim panel for spring strut mounts