Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-900003.png)
1. Fit the seal -1- from above -A-.
Installing front lid seal
INFORMATION: Pay particular attention to the areas near the tight roundings for correct installation; there must be no deformation or stretching.
1. Pre-position the seal -1- and press onto the sheetmetal flanges in this area -A-.
2. Apply the seal evenly along the flange. Position and press the seal without any tension on the flanges to the wing -B-, to the closing panel -C- and
to the radiator tank cover -D-.
3. Check for correct fitting -inset-.
4. Close front lid.
