Cayman (987) F6-2.9L (2009)
5 - Bolt (replace after loosening)
6 - Brake pushrod
7 - Brake pedal
8 - Bearing sleeves
1. Grease bracket for brake pedal.
Grease bracket close to the pedal bearing axle -Arrows- with Renocal (Glissando VW 745). Part No. 000.043.206.21 (10g tube).
2. Insert brake pedal.
Turn the brake pedal -7- and brake pushrod -6- as required.
Brake pedal
3. Fit brake pushrod on brake pedal. Use a new bolt, see -Inset- (replace bolt after loosening).
Tighten new bolt, see -Inset-.
-> Tightening torque: +10 Nm (+7.5 ftlb.)
4. Install pedal axle.
Tighten pedal axle -2-.
-> Tightening torque: +10 Nm (+7.5 ftlb.)-2 Nm (-1.5 ftlb.)
Installing clutch pedal
Installing clutch pedal
Information
Advanced grease specification
Grease bracket in area of pedal bearing axle -Arrows- with Renocal (Glissando VW 745). Part No. 000.043.206.21 (10g tube).