Cayman (987) F6-2.9L (2009)
Information on PCCB brake pads
Damping plates in brake pistons
Since the production launch, Pagid P40-2 brake pads with -brake-piston damping plates- have been fitted on the rear axle for PCCB brakes.
Some brake-piston damping plates are no longer used
With the introduction of modified brake pads - Pagid P40-3 - the brake-piston damping plates are no longer used (refer to the Parts Catalogue for
information on use/allocation).
Preliminary work
Remove wheel.
Removing rear brake pads-PCCB brakes
The core of the warning contact wire must not be left exposed! Worn insulation is not important!
If necessary, remove a little brake fluid from the reservoir by suction in order to prevent an overflow when the disc brake pads are pushed back!