Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-507003.png)
Information
Ensure that the hooks (curved ends of the spring) of the compression springs are engaged correctly on the wheel carrier.
The ends of the springs must be pointing upwards on wheel carriers with index 04 or 05 (last 2 digits of the part number).
In the case of modified wheel carriers with index 06 or higher (used in production from 21 October 2005 onwards), the ends of the springs must point
towards the center of the wheel (left spring pointing right/right spring pointing left).
The wheel carriers are differentiated based on the part number, which can be seen close to the (raised) steering arm.
Brake shoes
2. Clean the levelling and centering surfaces on the brake disc and wheel hub.
Then apply a very thin coat of Optimoly TA to the centering surface on the wheel hub.
3. Install brake discs.
Information
The grey cast-iron brake discs at the rear right and rear left are identical. They are available with different external diameters and in different
thicknesses (depending on the vehicle variant).
Rear PCCB brake discs are not identical. Observe marking for "right" and "left" side during assembly!
Removing/fitting parking-brake cable
4. Engage the brake cable at the parking-brake lever.
