Cayman (987) F6-2.9L (2009)
-
Chain tensioner on cylinder head, cylinder bank 1-3, identification: two rings -Arrows-
Chain tensioner, cylinders 1 - 3
-
Chain tensioner on cylinder head, cylinder bank 4-6, no identification.
Chain tensioner 4 - 6
Preliminary work for removing camshafts
Preliminary work for removing camshafts
1. For disassembling cylinder side 1-3, loosen the ground cable on the cylinder head -arrow- by unscrewing a Torx screw (M8) and remove the cable.
Disconnect oil pressure switch cable plug.
Engine ground strap
2. Remove ignition coils -1-. In each case unscrew two Torx socket screws M6 x 25 and pull the ignition coils out of the spark-plug recess.