Cayman (987) F6-2.9L (2009)
2.2. Collect emerging residual fuel.
3. Connect test pressure gauge and lines to the fuel lines.
3.1. Insert connection lines into the relevant couplings.
3.2. Secure pressure gauge -1- to a fixed component using chain.
4. Start the engine and read off the fuel pressure on the pressure gauge. - Fuel pressure - engine idling: 5.0 bar ± 0.3 bar
5. Switch off the engine after reading the fuel pressure.
6. Holding pressure test (if required): - Pressure: 4.0 bar
7. Pull off test connections and remove test pressure gauge.
7.1. Connect plug-in coupling for fuel supply line -1-.
7.2. The coupling must lock with an audible click. Pull to check that the connection is secure.