Cayman (987) F6-2.9L (2009)
INFORMATION: The help of another person is required for removing and installing the silencer.
3. Remove rear silencer.
3.1. Open the holding clamp -2- by unscrewing a hexagon-head bolt (M8 x 40, a/f 13) -2a-.
3.2. Replace the holding clamp.
3.3. Unscrew two M8 hexagon-head bolts (a/f 13) -arrow- on the silencer holder. Counter at the hexagon nuts (a/f 13).
3.4. Remove rear silencer with the help of another person.
Removing complete exhaust system (both rear silencers)
CAUTION:
Hot components
-
Risk of burns
-
Let hot components cool down.
-
Wear personal protective gear.
INFORMATION: Treat corroded components with anti-rust agent or heat.
1. Unscrew three M8 hexagon nuts (a/f 13) on the three-hole flange -arrow-.
INFORMATION: The help of another person is required for removing and installing the silencer.
2. Remove exhaust system.
Unscrew two M8 hexagon-head bolts (a/f 13) -arrows- on the rear silencer holder at the left -A- and right -B-.
2.1. To do this, counter at the M8 hexagon nuts (a/f 13).
2.2. Remove exhaust system completely by moving it downwards with the help of another person.