porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Compressor|Page 3356 > < Removing and Installing Compressor
Page 2
background image

WARNING:
Danger of injury and material damage when using Pentosin.
-

Risk of skin irritation and damage to skin.

-

Damage to hoses and wiring.
-

Wear protective gloves and goggles.

-

In the event of contact (eyes or skin), wash immediately with water.

-

Collect emerging Pentosin.

-

Use caps to protect the wiring against soiling and damage.

-

Clean hoses and wiring immediately.

1. Remove Pentosin from the power-steering reservoir by suction and pour it into a suitable container.

2. Release bayonet lock -Arrow- on the power-steering reservoir and remove power-steering reservoir.

3. Unscrew rear Torx screw for air-conditioning compressor (M8 x 120) -1- between the pipes of the intake system.

4. Unscrew front Torx screws for air-conditioning compressor (M8 x 90) -1- and -2-.
5. Disconnect electric plug connection on the air-conditioning compressor's electric line.

6. Unclip refrigerant hoses -1- and -2- between body and intake-air distributor.

INFORMATION:  After removal, place the air-conditioning compressor on a suitable protective support (e.g. foam, neoprene, etc.).

Removing and Installing Compressor|Page 3356 > < Removing and Installing Compressor