porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Cover (Cold Air Bulkhead)|Page 5466 > < Removing and Installing Cover (Cold Air Bulkhead)|Page 5464
Page 21
background image

4. Screw in dashboard -2- near outer air guides -3- with the fastening screws -1-.

Securing intermediate piece for defroster cover

1. Position fastening screws -1- with the defroster cover lid -3- on the intermediate piece for the defroster cover -2- and tighten as required.

Tightening torque: Final tightening: 2.0 ftlb.

Removing and Installing Cover (Cold Air Bulkhead)|Page 5466 > < Removing and Installing Cover (Cold Air Bulkhead)|Page 5464