Cayman (987) F6-2.9L (2009)
Instrument Cluster / Carrier: Service and Repair
Removing and Installing Instrument Cluster
Removing And Installing Instrument Cluster
Tools
Technical Values
Preliminary work
Preliminary work for instrument cluster
Remove trim for steering column.
Removing instrument cluster
CAUTION:
Sudden voltage interruption of the power supply to the control module.
-
Destruction of the control module.
-
During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery
charger with a current rating of at least 40 A to the vehicle battery.
-
Prior to disconnecting the control module, switch off the ignition and remove the ignition key.
1. If a new instrument cluster is to be installed, read out the values if possible from the instrument cluster.
2. Loosen the steering wheel adjustment, put the steering wheel in the front-most and lowest position and lock the steering wheel adjustment.
3. Unscrew the two fastening screws -1-.
4. Pull instrument cluster forward, push side panels -2- to the side.