Cayman (987) F6-2.9L (2009)
Marker Lamp: Service and Repair
Removing And Installing Light Bulb For Marker Light
Preliminary work
1. Remove the front apron.
Removing light bulb for marker light
1. Loosen light bulb for marker light.
1.1. Release -arrow A- and pull off -arrow B- connector.
1.2. Unscrew the two fastening screws -1-.
2. Remove light bulb for marker light.
2.1. Remove light bulb for marker light with the lower guide out of the front apron -arrow A-. Turn the light bulb anti-clockwise to do this.
2.2. Remove light bulb for marker light with the upper guide out of the front apron -arrow B-.
Installing light bulb for marker light
1. Install light bulb for marker light.
1.1. Fit light bulb for marker light with the upper guide into the front apron -arrow A-.