Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-128014.png)
Preliminary work
Preliminary work for compressor/evaporator line
Draining refrigerant.
Remove air-conditioning compressor from engine.
Removing compressor-evaporator line
INFORMATION:
-
When loosening or tightening the refrigerant lines with line connections, always counter with the special tool assembly tool 9822 if possible.
-
When loosening or tightening the refrigerant lines with connections to air-conditioning components (e.g. condenser), always counter with a size 21
open-ended wrench if possible.
-
Close off all lines and connections using suitable plugs during removal.
-
Before re-installing the component, check the O-rings of the refrigerant lines for damage and replaced them if necessary.
1. Unscrew fastening screw -2- on compressor, pull out line on compressor and remove it from support -7-.
2. Unscrew fastening nut -5- on cable holder, open cable holder and pull line out of rubber mounting -6-.
