porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Replacing Tire Sealing Compound|Page 881 > < Replacing Tire Sealing Compound
Page 1
background image

Tires: Service and Repair
Mounting Tires (Removing and Installing Tires) - For Vehicles With and Without Tire Pressure
Monitoring (TPM) System

Mounting tires (removing and installing tires) - for vehicles with and without Tire Pressure Monitoring (TPM) system

Tire removal/mounting machine

Only use recommended tire removal/mounting machine and auxiliary equipment (special mounting lever, bead holding down device).

WE 1084 Tire removal/mounting machine

Auxiliary equipment

Auxiliary equipment

1 - Special mounting lever with plastic protection.
2 - Holding-down device 9539 - for holding down the tire bead.
3 - Wulstboy - for holding down the tire bead (alternative to holding-down device 9539/item 2)
4 - Adhesive weight remover - commercially available

Requirements/information on removing/mounting tires

Information

Tire temperature during removal/mounting must be approx. 20 degrees C (at least 15 degrees C). Allow enough time to heat the vehicle/tires in a
suitable environment if necessary (at room temperature of more than 15 degrees C). Example: If the room temperature of the workshop is approx.
20 degrees C and the tire temperature is approx. - 15 degrees C, approx. 3 hours are required to heat the tires to the required temperature.
Before removal/mounting it is important to establish whether a Tire Pressure Monitoring system (TPM) is fitted! The tire valve serves as the
distinguishing feature. Without TPM: rubber valve. With TPM: aluminium valve. If a TPM system is fitted, read the special information on the
Tire Pressure Monitoring system.
Vehicles with TPM: Before changing a tire, read out the remaining life span of the wheel electronics unit (battery capacity) using the PIWIS
Tester. The value you read out gives an indication as to whether or not it needs to be replaced (not a 100% value). If the values are considerably
lower than expected for the next tire change, talk to the customer and determine whether he/she is happy to have the wheel electronics unit(s)
replaced at this time.

Replacing Tire Sealing Compound|Page 881 > < Replacing Tire Sealing Compound