Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-567040.png)
34. Unscrew ground strap -58-.
34.1. Screw off fastening nut and remove ground strap -arrow-.
35. Release connector at transmission control unit (PDK) -59- and pull it off.
35.1. Unclip wire harness to transmission control unit (PDK) at both line holders -arrows-.
36. Remove grommet -60- and pull through the engine wire harness in direction of engine compartment.
37. Removing wire harness for engine.
37.1. Unscrew fastening screw -1- of cable duct on the left and right.
37.2. Unclip cable duct on the left and right -arrows-.
37.3. Remove wire harness for engine.
Installing wire harness for engine
