Cayman (987) F6-2.9L (2009)
1.4. Unclip lines from the attachment points on the canister -3-.
Removing carbon canister - USA Version
1. Remove carbon canister holder.
Unclip cable plug on the canister -1- and then disconnect it.
1.1. Unscrew two M6 internal Torx screws -2- on the plastic holder and press the holder -3- out of the guide in direction of travel.
2. Remove carbon canister.
2.1. Lift up the carbon canister -arrow-, release the small plug-in coupling -2- and pull it down and off.