Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-390001.png)
Air Flow Meter/Sensor: Initial Inspection and Diagnostic Overview
Diagnosis Of Air Mass Meter
The Diagnosis of the air mass meter is a non-intermittened diagnosis
The output voltage of the air mass meter is a measure of air mass. The diagnostic routine compares the mass flow measured by the air mass meter with a
calculated mass flow, derived from engine speed an throttle position.
If the output voltage of the air mass meter is above a threshold value, a fault is detected. If the output voltage of the air mass meter is lower than a
threshold value, a fault is detected.
If the measured mass flow from the air mass meter is above a range, built up by a characteristic map, a fault is detected. If the measured mass flow from
the air mass meter is below a range, built up by a characteristic map, a fault is detected.
Error paths:
Flow chart:
