Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-265002.png)
NOTE:
Voltage peaks
-
Risk of damage to load or to the control unit
-
Remove the ignition key and switch off load before disconnecting or removing load.
1. Remove DME control unit.
1.1. Screw off the three fastening nuts -1- on the DME control unit.
1.2. Place DME control unit in the luggage compartment.
2. Pull off connectors on the DME control unit.
2.1. Release -arrows A- and pull off -arrows B- the five connectors.
2.2. Remove DME control unit.
Installing DME control unit
1. Plug in connectors on the DME control unit.
1.1. Push in connectors on the DME control unit -arrows- until they engage securely.
